The test standard summaries are for general guidance only. Though believed to be accurate at the time of writing, this may change over time. So this information should not be used as a substitute for referring to a complete test standard, at an appropriate revision level.
Note: the terms salt spray, salt mist and salt fog are all in wide spread use within corrosion test standards. In this context they can be considered to be equivalent and interchangeable terms.
AS 2331 甲基苯丙胺 3.3
腐蚀及相关性能测试 – 铜加速醋酸盐雾测试
可用于测试金属涂层的相对耐腐蚀性，当暴露于铜加速醋酸盐喷雾气候下的高温下时。
将试样置于封闭的腔室中，并暴露于酸化（pH 3.1至3.3）盐水溶液的连续间接喷雾中，该溶液以1.0至2.0ml / 80cm² /小时的速率在+50C的腔室温度下落到试样上。 这种气候在恒定的稳态条件下保持。 测试持续时间是可变的。
此测试也称为 CASS 测试。
本测试标准不允许腔室容积小于200升。
有关澳大利亚标准的更多信息，请访问： www.standards.com.au